Revolv Space has produced and delivered more than 83 units of satellite hardware. Twenty-seven of them are in orbit. Eight international customers have bought them. On November 11 the Turin company closed a €5 million Series A — $5.6 million — and its lifetime total since 2022 now stands at €8.6 million, €7.8 million of it equity.

Those numbers sit awkwardly together. Eighty-three delivered mechanisms describe a supplier with a flight record. A €5.6 million round is the size of a seed extension for a software company. Marco Sala, chief executive and co-founder, framed it as a beginning: the goal is "to produce hundreds of units a year, serve more customers with increasingly integrated systems, and reach full financial autonomy".

Our read: this round pays for manufacturing capacity. The hardware question is settled — SARA, PAVEL and HOLLY have flown, and flight models sit in customers' clean rooms. What €5.6 million buys is floor space, test time and technicians, and the number that will decide the bet is repeat orders per customer.

What €5 million buys in Turin

About two thirds of the raise goes to industrializing motion products that are already qualified — solar array drive assemblies, deployment hinges — and to raising production capacity. Primo Capital, which first invested in 2024 through its Primo Space fund and returned for this round, said the Turin site will grow from 500 to 1,500 square metres. The team of 40 grows by roughly 60%, with about 25 hires planned over the next few years.

Constellation buyers purchase in lots of dozens or hundreds, and they want standardized parts, reliable performance, competitive prices and short lead times. A larger clean room helps with three of those four.

From a space sunflower to a catalogue


CHRONICLE: Revolv Space
────────────────────────────
2022  ·  🌻  Founded in Turin on a "space sunflower" idea
2024  ·  💰  €2.6M raise; first commercial contracts
2025  ·  🛰  SARA, PAVEL and HOLLY fly on D-Orbit's ION
2025  ·  📦  First repeat orders; Blue Canyon becomes first US customer
2026  ·  🛰  Infinite Orbits buys SARA-Pro for GEO servicers
2026  ·  ✅  PolSIR flight models delivered to Blue Canyon
◉ NOW ·  €5M Series A led by Deep Ocean Capital
🔥 NEXT· Solar-array line; "hundreds of units a year"

Company announcements, 2022–2026

The flight record is the sales pitch

Revolv's first idea was a space sunflower: a mechanism that keeps a satellite's solar wings pointed at the sun the way a flower tracks light. That became SARA, an autonomous solar array drive assembly. SARA Nano weighs under 500 grams, turns a wing ±180° without slip rings, and transfers up to 500 W. Sun tracking adds 40–50% more energy than a fixed array, which for a small satellite is the difference between a payload that runs all orbit and one that naps in eclipse. PAVEL, the solar array, and HOLLY, the deployment hinge, complete the first-generation catalogue.

The proof arrived in stages. In 2025 all three products flew on D-Orbit's ION platform. In May 2026, Toulouse-based Infinite Orbits ordered 3 engineering models and 4 flight models of SARA-Pro for geostationary servicing spacecraft — Revolv's first GEO mission, and its first hardware for a mission class where losing power during a proximity manoeuvre becomes a collision risk. In August 2026 the company shipped four SARA Nano flight models and two engineering models to Blue Canyon Technologies for NASA's PolSIR mission, a pair of 16U CubeSats built to measure high-altitude ice clouds.

For the Revolv of four years ago, this round would have been the finish line. Today, for us, it is a starting point.— Marco Sala, chief executive and co-founder, Revolv Space

The 27-of-83 problem

Revolv has delivered more than 83 units and has 27 in orbit. The gap is inventory, not defects: qualified hardware that has been built, invoiced and is waiting for a launch slot. For a component supplier that is the working-capital trap. Every unit in a clean room has already been paid for by someone, and until it flies it cannot generate the next order.

The queue it sells into is documented. At World Satellite Business Week in September, prime manufacturers described factory capacity — Thales Alenia's Rome plant is built for 100 satellites a year, MDA's Montreal line for up to two a day — while component makers described waiting lists. ThrustMe doubled output three years running to 400 units. Orbion was running at about 90% of capacity, Dcubed above 100%. For triple-junction solar cells, the choice was "to pay a fortune for it or wait 18 plus months for shipment".

Revolv's pitch sits inside that queue, one tier down. A supplier that can quote a shorter lead time does not have to be cheaper; it has to be available. As we wrote in November, Argotec's €50 million raise targeted the same wager one level up — turning 52 satellites a year into 80.

Vertical integration is a purchasing decision

Part of the round funds solar arrays compatible with the existing drives. That would let Revolv sell the whole power-generation subsystem pre-integrated: one purchase order instead of two, one qualification campaign instead of two, and less integration work for a builder already assembling a bus, a payload and a launch campaign.

It also moves Revolv toward the crowded end of the market. This month Gama, a Paris startup, raised €15 million in seed to mass-produce deployable arrays from terrestrial silicon cells. MP Space raised $16 million in October to build satellite batteries and power electronics. Capital is flowing into every link of the power chain, which strengthens the integration argument and weakens the margin argument.

⚙️
What the round actually pays for
Two thirds to industrializing qualified motion products.
Turin floor space: 500 → 1,500 m².
Team: 40 → about 64, roughly 25 hires over the next few years.
The rest to a solar-array line that would pre-integrate the power subsystem.

What would make €5 million look small

The arithmetic is the story. Two thirds of a €5.6 million round is roughly €3.7 million for capacity. That pays for a tripled floor, about 25 technicians and engineers, and test equipment. Reaching hundreds of units a year from 83 delivered means at least doubling the production rate of the first four years, and then holding it.

There are paths where the bet works. Infinite Orbits turns GEO servicing into a multi-mission programme. PolSIR's flight heritage becomes repeat orders from NASA-adjacent integrators. A constellation prime standardizes on SARA and buys in three figures. None of those are announced. Revolv has not published an order backlog, and €8.6 million raised in total is a fraction of what a constellation-scale production line costs.

What is verifiable is narrower. Eight customers, 27 units in the environment that counts, and a Series A spent on square metres and technicians instead of another prototype. In a supply chain where the constraint moved from design to delivery, that is at least aimed at the right bottleneck.

Revolv Space closes a €5M Series A to scale production
The company's own announcement: round structure, investor list, unit counts and the Turin expansion plan.
Primary source for the round, the unit counts and the production targets.
Primo Capital on Revolv's Series A and the Turin expansion
Investor statement carrying the facility and headcount figures: 500 to 1,500 square metres, 40 staff growing about 60%.
Where the capacity and hiring numbers come from.
Via Satellite: Italy's Revolv Space closes its Series A
Independent trade coverage confirming the €5M round, the €8.6M total, eight customers, 27 units in orbit and 83 delivered.
Trade-press confirmation of the figures used throughout.